Rule number 1: When you use the chisel make sure the hand that your not using to hold the blade is behind the blade otherwise you might cut yourself.
What you need!
.A paint roller!
.A pencil!
.Some paper x3!
.Any color crayon!
.Plasters just incase you hurt yourself with the blade!
.A veriety of patterns or drawings!
.A board so you can use to rest your wood on!
.A few chissels please keep out of reach from little children as they won't know how to use them!
.A chissel blade to screw into the chissel!
.A variety of colored inks either red ,black or blue!
.And last of all some soft wood to do your print on!
How to do print making!
- To get started come up with a design that you would like to cut out.
- If you like your design than you can draw it on a piece of paper as a draft.
- When you are finished with your draft than you can copy your design from paper to wood.
- Use a chissel to go through the pencil lines make sure your hand is behind the blade,if you cut yourself than clean out your cut with clean water than dry it and place a plaster over top of your cut.
- Before you put ink on your wood do a crayon rubbing by puting a piece of paper on top of your design and get a crayon and start shading on the piece of paper.
- If the lines are getting covered by the crayon than you will need to get your chissel and go through all the lines so if you do crayon rubbings the crayon won't go over the lines
- To finish of grab your roller,ink and paint shirt.
- Put your paint shirt on and pour your ink onto a piece of newspaper.
- Then choose the color that you want to do and paint over the wood.
- Next place a piece of paper on top of the wood and flaten it by using your hands.
- Carefully take the peice of paper of your wood and leave the piece of paper and the wood to dry.
- And repeat instructions as much as you like.
.
No comments:
Post a Comment